Wind turbine
Drones as a service · Wind first

One-click drones as a service. Rent a drone, your team runs the inspection, return it, pay for the report.

A certified remote pilot keeps the drone in sight and supervises every flight. You get the complete drone system, from the mission to the reviewed report, and your own team runs the inspection. We start with wind turbines and build the same platform out to other infrastructure.

What we do

You don't need your own drone program or a fleet of inspection drones.

Your trained crew starts the mission with one click and an operator supervises it. SmartDrones supplies the drone, the flight software and the reports.

SmartDrones in 45 seconds. English voice-over with subtitles.

Our platform

We develop the drone, the flight controller and the firmware. LiDAR-based positioning for sites with limited GNSS is in development. Our flight-control stack does not depend on DJI platforms, and we integrate selected third-party sensors, compute, payloads and radios. Designed and developed in Poland

The problem

Inspection still runs on handovers.

A typical job passes from the asset owner to a service company, then to a pilot, the equipment, data review, the report and the paperwork. Every handover adds delay, changes how the data is captured and breaks the asset's history.

◷

Too many handoffs

Requests, pilots, drones, contracts, reports and billing are coordinated manually across disconnected tools.

◈

Non-repeatable capture

Manual flight changes distance, angle and coverage, so inspections are hard to compare across time and sites.

⚡

No asset history

Results end up as loose files and PDFs, not as a record you can use to plan maintenance and the next mission.

The system

One platform, from the inspection request to the AI report.

SmartDrones runs every inspection the same way, from order to invoice: planning, operator-supervised flight, AI-assisted analysis (in validation), reviewed reports and billing. The drone service runs on the SmartDrones platform.

aisDrone i900 in the field
STEP 01

aisDrone - Supervised capture

Repeatable missions Operator-supervised missions High-res RGB; thermal on a separate flight (in development)
STEP 02

aisBlade - Wind inspection module

AI-assisted defect detection (in validation) Blade-positioned findings Review-ready reports
STEP 03

aisCloud - Operations platform

AI reports Pay per report & invoices Fleet & data platform
One click to start an operator-supervised mission
Per report you pay for each turbine report
Lower cost less manual work on site
Rent it no fleet purchase required
AIS ecosystem

One platform for several kinds of infrastructure.

Hardware, flight software, cloud and the industry applications are designed as one system.

aisDrone i900 Hardware

Our inspection UAV and payload, built for repeatable missions on wind turbines, PV farms, telecom towers and other assets a multirotor can inspect.

aisFlight Onboard electronics

Onboard electronics in three tiers (Pro, Standard, Mini), aisPilot inside: flight control, firmware, navigation, mission computer and sensor integration.

aisController Mission control unit

Rugged field station for supervised flight and live telemetry. The operator keeps the safety controls and starts the mission with one click.

aisPlanner Planning & real-time control

Plans the mission and controls it live: pick the industry module, generate the flight plan, watch the flight and pass the captured data on for analysis.

aisCloud Operations & data platform

Runs inspection operations: assets, requests, reports, history, billing and fleet data. Offers and contracts are planned.

Vertical apps Built on the platform

Each industry module is a plugin for aisPilot and aisPlanner and also a web service of its own. It tells the flight software how to fly a given job, then turns the captured data into AI analysis, reports and client workflows.

aisBlade Wind In development

Wind-blade inspection: operator-supervised missions, AI-assisted findings (in validation), reviewed reports; automatic flight along the blade is in development.

Further applications in preparation: PV farm and telecom tower inspection.

How the platform expands
  1. Shared foundationOnboard core for flight control, navigation and mission software, plus aisCloud for inspection data, report review and asset history.
  2. Next applicationAdapt sensors, capture, analysis and reports.
  3. ValidationQuality, operating cost and paid demand.
Repeat proven delivery in new regions
  1. Local paid demandA region with recurring, paid inspection work.
  2. Rental & service partner PlannedLocal equipment, delivery, maintenance and support.
  3. Customer-run campaignsCustomer teams run the missions on their own assets.

Shared software from the central platform.

Wind comes first.

Hardware & software

From the PCB to the AI report.

We develop the core technology: electronics, firmware, flight control, navigation, mission planning and cloud operations. It is one system, built to fly the same way every time, and we can adapt it to how large customers work.

  • ✓ Flight controller and firmware from the aisPilot family.
  • ✓ LiDAR positioning (in development). For sites where GNSS coverage is limited.
  • ✓ Validated before the field. We test flight behavior in SIL/HIL setups and in simulation before more missions go out.
aisDrone i900 inspection UAV

Drone aisDrone i900

Our UAV for repeatable inspection of utility-scale infrastructure. High-resolution RGB, thermal as an optional separate flight (in development), and LiDAR on board for positioning and safety.

aisFlight onboard electronics

Onboard electronics aisFlight

Onboard electronics in three tiers (Pro, Standard, Mini) with aisPilot inside: flight control, navigation, mission computer, integration and power. Integration into third-party UAVs is planned.

aisController ground control station

Ground control aisController

Mission control unit with aisPlanner, live telemetry and supervised flight, built for safe work in the field.

aisPlanner - planning & mission control

Turn a use-case into a planned mission.

aisPlanner is the operator layer on aisController: it selects the vertical module, generates the mission, keeps the live drone link and supervises the flight from takeoff to data handoff.

  • ✓ Planning per industry module. Each industry module, such as aisBlade, defines how the drone should fly and what data it must capture.
  • ✓ Real-time supervision. Operators monitor telemetry, mission progress, safety state and the onboard systems while the drone flies the plan.
  • ✓ Straight to the cloud. Captured data, validation and reports go to the right industry web service and into aisCloud.
aisBlade - wind module

Wind turbine blade inspection.

aisBlade is our first application: a web service for wind blade analysis and reporting, with aisPlanner plugins for operator-supervised turbine missions. AI-assisted findings (in validation) and reviewed reports; automatic flight along the blade is in development.

  • ✓ AI-assisted defect detection (in validation). Cracks, erosion, delamination and other surface findings are sorted and ready for review.
  • ✓ Blade-level context. Every finding is tied to the blade, side, span position and inspection history.
  • ✓ Client-ready reports. Every report follows the same structure, so you can compare turbines, farms and inspections over time.
Sample output

A report your team can act on.

Each inspection ends with a structured report: turbine and blade ID, defect severity, measurements, locations and photo evidence, ready for a technician to review and send to the client.

aisCloud - inspection operations platform

The operating layer for drones as a service.

One login to order or rent a drone, follow the mission, review the report and pay for it, with all invoices in the same place. Offers, contracts and a pilot network are planned.

Operator

Asset owners add infrastructure, request inspections, review reports and keep asset history in one place.

Service

Service companies quote work, coordinate pilots and drones, approve outputs and manage delivery.

Pilot Planned

Pilots set availability, accept missions and supervise the flight instead of manually flying every capture.

Rental partner

Planned regional rental & service partners manage aisDrone capacity, aisController units, availability and rental settlement.

How we work

How an inspection runs.

01

Demand

Operator adds assets and requests an inspection.

02

Plan & offer

The service company arranges the pilot, the drone, the industry module and the price.

03

e-Contracts Planned

Contracts signed electronically (Autenti).

04

Fly

Your team flies the mission planned in aisPlanner, under operator supervision.

05

Report & settle

Reviewed report, payment per report and invoices in one workflow.

How it works commercially: you rent the drone, your team inspects, you return it and pay for the report. For repeat inspections there is a per-site subscription.

The customer flies as the UAS operator under its own authorisation (PDRA-S01). Behind it are a central platform (product, cloud, data processing, QA), planned regional rental and service partners, and the customer teams who run the missions.

Working with

Built with industry feedback.

We validate the system with operators, service companies and partners who know the real limits of inspection work.

Built on SmartDrones

Industry applications on the same platform.

New verticals reuse the same hardware, the aisPilot ecosystem, aisPlanner mission control and aisCloud operations layer. aisSDK and the aisClientApp skeleton make it faster to launch specialized inspection products.

Open ecosystem

Your vertical

Build a new industry module on aisPilot, aisPlanner, aisCloud and aisSDK. A few examples are below, or bring your own.

Build with us

Possible verticals teams could build on the platform

Bridges & viaducts Building façades & roofs Power transmission lines Railway infrastructure Storage tanks

…and any repeatable structure a multirotor can fly.

About the company

Polish deep-tech for drone inspection as a service.

SmartDrones develops the core technology behind its drones as a service: hardware, electronics, firmware, flight software, mission control, cloud workflows and vertical applications.

2020 Founded
Poland Headquarters
The team

The people behind the platform.

A small team covering UAV hardware, embedded systems, autonomy, cloud software and commercial partnerships.

Maciej Kmet

Maciej Kmet

Founder / CEO / CTO
Leads technology and product direction across autonomy, flight control and systems integration.
Krzysztof Kmet

Krzysztof Kmet

Co-Founder, COO & CMO
Responsible for UAV design, mechanical construction and payload integration.
Karol Oleksa

Karol Oleksa

Chairman of the Supervisory Board
Supports go-to-market strategy, growth and industry partnerships.
Get in touch

Let's talk about your inspection workflow.

Write to us about investment or a pilot deployment. Tell us about your assets and we'll show you how the platform fits.

✉
◷
SmartDrones sp. z o.o.
ul. Frezerów 2
20-209 Lublin, Poland

We process the data from this form to answer your inquiry. Details: Privacy Policy.